Paradyne 6381 - Manual (Page 19)

Hotwire 6210, 6211, and 6381 User’s Guide
5. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list
box.
6. Click to return to the Network dialog box, and then click again.
You may be prompted to install files from your Windows 95/98 installation CD. Follow the instructions to
install the files.
7. Click on to restart the PC and complete the TCP/IP installation.
8. After restarting your PC, open the Control Panel window, and then click on the Network icon.
9. Select the network component labeled TCP/IP, and then click on .
If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
10. In the TCP/IP Properties dialog box, click on the IP Address tab.
11. Click in the radio button labeled Use the following IP address and type 192.168.1.x (where x is any
number between 3 and 254) in the IP Address field. Type 255.255.255.0 in the Subnet Mask field.
12. Click on twice to confirm and save your changes. You will be prompted to restart
Windows. Click on and restart your PC again.
3.2.6 Windows NT 4.0:
1. In the Windows NT task bar, click on the Start button, point to Settings, and then click on Control
Panel.
2. In the Control Panel window, double click on the Network icon.
3. In the Network dialog box, click on the Protocols tab.
The Protocols tab displays a list of currently installed network protocols. If the list includes TCP/IP, the
protocol has already been enabled, in which case you can skip to Step 9.
4. If TCP/IP does not appear as an installed component, click on .
5. In the Select Network Protocol dialog box, select TCP/IP, and then click on .
You may be prompted to install files from your Windows NT installation CD or other media. Follow the
instructions to install the files.
After all files are installed, a window displays to inform you that a TCP/IP service called DHCP can be set
up to dynamically assign IP information.
6. Click on to continue, and then click on if prompted to restart your computer.
7. After restarting your PC, open the Control Panel window, and then double-click on the Network icon.
8. In the Network dialog box, click on the Protocols tab.
9. In the Protocols tab, select TCP/IP, and then click on .
10. In the Microsoft TCP/IP Properties dialog box, click in the radio button labeled Use the following IP
address and type 192.168.1.x (where x is any number between 3 and 254) in the IP Address field. Type
255.255.255.0 in the Subnet Mask field.
11. Click on twice to confirm and save your changes, and then close the Control Panel.
6210-A2-GB21-00 April 2004 19