Windows 2000 – Paradyne 6381 User Manual
Page 17
Hotwire 6210, 6211, and 6381 User’s Guide
Figure 3.9. TCP/IP Properties in Windows XP
6. Click
on
twice to confirm your changes, and close the Control Panel.
3.2.3
Windows 2000:
1. In the Windows task bar, click on the Start button, point to Settings, and then select Control Panel.
2. Double-click
on
the
Network and Dial-up Connections icon.
3. In
the
Network and Dial-up Connections window, right-click on the Local Area Connection icon,
and then select Properties.
The Local Area Connection Properties dialog box is displayed with a list of currently installed
network components. If the list includes Internet Protocol (TCP/IP), the protocol has already been
enabled, in which case you can skip to Step 10.
4. If
Internet Protocol (TCP/IP) does not appear as an installed component, click on
.
5. In
the
Select Network Component Type dialog box, select Protocol, and then click on
.
6. Select
Internet Protocol (TCP/IP) in the Network Protocols list, and then click on
.
You may be prompted to install files from your Windows 2000 installation CD or other media. Follow the
instructions to install the files.
7. If prompted, click on
to restart your computer with the new settings.
8. After restarting your PC, double-click on the Network and Dial-up Connections icon in the Control
Panel.
9. In
Network and Dial-up Connections window, right-click on the Local Area Connection icon, and
then select Properties.
10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then
click on
.
6210-A2-GB21-00 April 2004 17