Panasonic KX-FP85AL - Manual (Page 73)

See pages 46 and 47 for details.
1. Follow steps 1–3 on page 72.
2. Rotate
to select
“YES”.
3. Press .
4. Press again.
5. Press . MENU
SET
SET
EASY DIAL
#80
To reset the advanced features,
except ECM selection (feature #68
on page 72) to their default settings
SET DEFAULT
YES
NO
Features Summary
73
You can confirm the status of the
other party’s machine.
● If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
● The connecting tone volume
cannot be adjusted.
#76
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones; fax
tone, ring back tone and busy tone.
CONNECTING TONE
ON
OFF
Code Display & Feature Settings How the unit operates
(The default setting is in bold type.)
#71
To set the ring melody
MELODY RINGER
A
B
C
See page 51 for details.
#70
(KX-FP81)
(KX-FP85)
If you have a pager and wish to
know when your unit receives an
incoming message (KX-FP85 only)
or a fax, activate this feature.
PAGER CALL
FAX PAGER CALL
ON
OFF
TAD/FAX
FAX ONLY
TEL/FAX
#78
If you use an extension telephone
in the TEL/FAX mode, select the
desired number of rings of the
extension telephone.
TEL/FAX RING
2, 3, 4, 5, 6,
7, 8, 9
#77
■ For KX-FP81 only
To change the receive mode in the
AUTO ANSWER setting
AUTO ANSWER
FAX ONLY
TEL/FAX
“FAX ONLY”: Facsimile only mode
(p. 43)
“TEL/FAX”: Telephone/Facsimile
mode (p. 46, 47)
“TAD/FAX”: Telephone Answering
Device/Facsimile mode (p. 54)
“FAX ONLY”: Facsimile only mode
(p. 43)
“TEL/FAX”: Telephone/Facsimile
mode (p. 46, 47)
#77
■ For KX-FP85 only
To change the receive mode in the
AUTO ANSWER setting
AUTO ANSWER