Remote operation, Kx-fp85 only), Other remote operations – Panasonic KX-FP85AL User Manual
Page 63
63
Remote Operation
(KX-FP85 only)
■
Erasing a specific message
Press
while listening to the message you
want to erase.
●
A long beep will also sound. The unit will then
play back the next message.
■
Erasing all the messages
Press
to erase all the messages.
●
A long beep will also sound.
■
Monitoring the room (KX-FP85AL only)
Press
to monitor the sound for about 30
seconds in the room where the unit is installed.
●
After 30 seconds, a beep sounds. To continue
monitoring, press
again within 10 seconds.
■
Recording a marker message
You can leave an additional message.
1. Wait for the voice guide.
2. Wait about 10 seconds.
3. Leave a message after the beep.
■
Re-recording a greeting message
You can change the contents of the TAD/FAX
greeting message.
1. Press
to start recording.
●
A long beep will sound.
2. Speak clearly up to 16 seconds.
●
If you pause for over 2 seconds, 6 beeps will
sound and the recording will stop. Repeat
from step 1 within 10 seconds.
3. When finished recording, press
.
●
The new greeting message will be played.
■
Skipping the greeting message
Press
during the greeting message playback.
●
The unit will skip the rest of the greeting
message.
0
9
7
6
6
5
4
Please leave your name and
message after the beep.
■
Turning the message transfer on or off
You must pre-program a transfer telephone
number beforehand (feature #60 on page 72).
Press
to turn ON the message transfer.
Press
to turn OFF the message transfer.
●
If a transfer telephone number is not
programmed, you cannot turn this feature ON.
■
Turning the pager call on or off
You must program a pager number beforehand
(feature #70 on page 51).
Press
to turn ON the pager call.
Press
to turn OFF the pager call.
●
If a pager number is not programmed, you
cannot turn this feature ON.
■
Changing the receive mode
Press
to change the receive mode from
TAD/FAX to TEL.
●
You cannot return to the TAD/FAX mode in the
same call. To return to the TAD/FAX mode, see
page 48.
8
0
8
4
8
3
8
2
8
1
The message has been erased.
Other remote operations
Voice guide example:
All messages have been erased.
All messages have been played.
Message transfer is set.
Transfer phone number is
123456789.
Message transfer is off.
Transfer phone number is not set.
Pager call is off.
Pager number is not set.
Pager call is set.
Pager number is 098765432.