Philips SWW1810 - Manual (Page 13)

13
English
5
Hook the key holes at the back of the
receiver on the screws.
6 Mount your
receiver
You can either mount the receiver on the wall
or on the back of the HDTV.
Mount your receiver on the
wall
1
Select a spot near the HDTV.
2
Drill two holes in the wall. Make sure that
the distance between the two holes is
1 25 /
32
” (45 mm) and the diameter of the
hole is 3 /
16
” (5 mm).
3
Punch the supplied two anchors into the
two holes on the wall.
4
Put the two screws into the anchors and
leave 1 /
8
” (3 mm) to mount the receiver on.
EN