Philips 288 - Manual (Page 7)

3
Introduction
Thank you for purchasing your Philips Az@lis 288.
This guide will help you to learn easily and quickly how to use your phone.
Symbols used in this guide
Ringer volume
A function displayed on your phone screen.
1 Represents a key on your phone keypad.
C < > o Represent a function on the compass key.
Long press: Press and hold the key for 2 seconds.
Activate/deactivate Pressing the same key (called a toggle key) or using
< / > will alternate between different options:
ex. Activate and Deactivate.
Press M ->
Settings
->
Call settings
->
Call forward
This represents a series of commands to tour the menu until you
reach the specific function being discussed. The most important
point to remember is the necessity to press o key AFTER EACH
LEVEL before you can tour the next level. So, the above example is:
Press M->
Settings
o ->
Call settings o
->
Call forward
o
Before your first call
The SIM card
To use your phone, you must insert a valid SIM card for your GSM
subscription.
This card contains your telephone number. It also has memory to store the
phone numbers and messages you wish to retain. If you use this card on
another phone, you still have the same phone number, stored numbers and
messages.
PIN and PUK codes
The PIN code is a secret code in your SIM card to protect it from abusive
use. If you or anyone else enters a wrong PIN code 3 times, your SIM card is
blocked. To unblock it, you must request the PUK code from your Network
Operator.
Read the safety instructions in the
Precautions section before use.