Philips 288 - Manual (Page 10)

6
Remove the battery
When disconnecting the battery, the settings for date and time will be lost.
Charge the battery
With the battery inside the phone:
L L L L NOTE:
The only way to turn off the charger is to unplug it, so use an easily accessible AC
power socket. You can connect the charger to an IT supply (Belgium only).
Bars moving ➨ battery is charging
Bars steady ➨ battery is fully charged*
Battery outline flashing (see Troubleshooting page 51).
* Keeping the mobile plugged to the charger when the battery is fully charged does
not damage the phone.
1 Press bottom of battery lightly
against battery latch.
2 Lift bottom of battery and slide it
out of the phone.
3 Unplug the connector from its slot.
1 Plug the connector into the
right socket at the base of the
phone.
2 Plug the transformer unit into
an easily accessible AC
power socket.