beautypg.com

1 configuring the printer – Panasonic DA-MC700 User Manual

Page 48

background image

38

When using AppleTalk protocol to print from Macintosh, select Enable for EtherTalk port
from the touch panel display.

•

Using EtherTalk: The printer is connected to the network.

4.1.1

Enabling Port and Setting Protocol

Here, we use enabling EtherTalk on the touch panel display as an example.

Procedure

Press Settings/Meter Check.

Select Tools Mode.

Enter the access number and select Confirm. The default password is set
as “11111”.

4.1

Configuring the Printer

See also other documents in the category Panasonic Printers: