Philips SE171 - Manual (Page 27)

27
Français
EN
Manage the area code
Note
This feature only applies to models with area •
code support.
You can define an area code (up to 5 digits).
This area code is automatically removed from
an incoming call if it matches with the code you
define. Then the phone number is saved in the
call log without an area code.
Activate/Deactivate auto removal of
area code
1
Press MENU.
2
Select [ADVANCED SET] > [AREA
CODE], then press OK to confirm.
3
Enter the area code, then press OK to
confirm.
The setting is saved. »
Network type
Note
This feature only applies to models with •
network type support.
1
Press MENU.
2
Select [ADVANCED SET] >
[NETWORK TYPE], then press OK.
3
Select a network type, then press OK.
The setting is saved. »
First ring
If you have subscribed for caller ID service with
your service provider, your phone can suppress
the first ring before the caller ID displays on
the screen. After the phone is reset, it can
detect automatically if the caller ID service
is subscribed and start to suppress the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Press MENU.
2
Select [ADVANCED SET] > [FIRST
RING], then press OK to confirm.
3
Select [ON]/[OFF], press OK to confirm.
The setting is saved. »
Note
To reset the first ring status, go to the reset •
menu.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
1
Press MENU.
2
Select [ADVANCED SET] > [ECO], then
press OK to confirm.
3
Select [ON]/[OFF], then press OK to
confirm.
The setting is saved. »
» ECO is displayed.
Note
When • ECO is activated, the connection range
between the handset and the base station can
be reduced.