Philips SE171 - Manual (Page 25)

25
Français
EN
10 Self-defined
settings
Customize the settings to make it your own phone.
Personalize the phone display
Name the handset
The name of the handset can be up to 10
characters. It is displayed on the handset
screen in standby mode.
1
Press MENU.
2
Select [PERSONAL SET] > [HANDSET
NAME], then press OK to confirm.
3
Enter or edit the name. To erase a
character, press BACK.
4
Press OK to confirm.
The setting is saved. »
Set the display language
Note
This feature only applies to models with •
multiple-language support.
Languages available for selection vary with •
different countries.
1
Press MENU.
2
Select [PERSONAL SET] >
[LANGUAGE], then press OK to confirm.
3
Select a language, then press OK to confirm.
The setting is saved. »
Personalize the sounds
Set the handset’s ringtone
You can select from 10 ringtones.
1
Press MENU.
2
Select [PERSONAL SET] > [HANDSET
TONE] > [RING TONES], then press
OK to confirm.
3
Select a ringtone, then press OK to confirm.
» The setting is saved.
Set the handset’s ringtone volume
You can select among 5 ringtone volume
levels or [OFF].
1
Press MENU.
2
Select [PERSONAL SET] > [HANDSET
TONE] >[RING VOLUME], then press
OK to confirm.
3
Select a volume level, then press OK to
confirm.
The setting is saved. »
Tip
To turn off the ringtone, press and hold • in
standby mode. Then displays on the screen.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Press MENU.
2
Select [PERSONAL SET] > [HANDSET
TONE] > [KEY BEEP], then press OK to
confirm.
3
Select [ON]/[OFF], then press OK to
confirm.
The setting is saved. »
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station/charger.
1
Press MENU.
2
Select [PERSONAL SET] > [HANDSET
TONE] >[DOCKING TONE], then
press OK to confirm.
3
Select [ON]/[OFF], then press OK to
confirm.
The setting is saved. »