Philips SE171 - Manual (Page 13)

13
Français
EN
Install the handset
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine or fire. Never discard batteries
in fire.
Use only the supplied batteries. •
Risk of decreased battery life! Never mix •
different brands or types of batteries.
Note
Charge the batteries for 8 hours before first •
use.
Warning
Check the battery polarity when inserting in •
the battery compartment. Incorrect polarity
may damage the product.
1
The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
2
Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, your
hear a docking sound.
The handset starts charging. »
Note
If the handset becomes warm when the •
batteries are being charged, it is normal.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium
and low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging completes.
The empty battery icon flashes.
The battery is low and needs
recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.