Polycom KIRK KWS1500 - Manual (Page 44)

KIRK Wireless Server 1500 Installation and Maintenance
Safety
WARNING
Only qualified service personnel may install this equipment. The instructions in this
manual are intended for use by qualified service personnel only.
Only qualified persons should service the solution.
The installation and service of this hardware is to be performed only by service personnel
having appropriate training and experience necessary to be aware of hazards to which
they are exposed in performing a task and of measures to minimize the danger to
themselves or other persons.
Electrical shock hazards from the telecommunication network and AC mains are possible
with this equipment. To minimize risk to service personnel and users, the solution must
be connected to an outlet with a third-wire Earth.
Service personnel must be alert to the possibility of high leakage currents becoming
available on metal solution surfaces during power line fault events near network lines.
These leakage currents normally safely flow to Protective Earth via the power cord.
Therefore, it is mandatory that connection to an earthed outlet is performed first and
removed last when cabling to the unit. Specifically, operations requiring the unit to be
powered down must have the network connections (exchange lines) removed first.
Important Safety Instructions and Product Information
Before using your telephone equipment, you should always follow basic safety instruction to
reduce the risk of fire, electrical shock and injury to persons, and damage to property.
1. Read and understand all instructions
2. Follow all warnings and instructions including those marked on the product
3. Unplug this product before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use damp cloth for cleaning
4. Do not install the telephone equipment in the bathroom or near a wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool
5. The product should be operated only from the type of power source indicated on the
instructions. If you are not sure of the type of power supply, consult your dealer or
local power company.
6. Do not overload wall outlets and extension cords as this can result in fire or electrical
shock.
7. Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in fire, electrical
shock, or injury. Never spill liquid of any kind into this product.
8. To reduce the risk of electrical shock or burns, do not disassemble this product.
Opening or removing covers may expose you to dangerous voltages, dangerous
electrical current, or other risks. Incorrect reassemble can cause electrical shock when
the appliance is subsequently used. If the product need repair, consult your dealer.
9. If the product uses PoE, the equipment is to be connected only to PoE networks
without connection to outside plant
10. Refer servicing to qualified service personnel under the following conditions:
72160400_issue_B 44