Kirk programming tools, 3 kirk programming tools – Polycom KIRK KWS1500 User Manual
Page 30
KIRK Wireless Server 1500 Installation and Maintenance
4.3 KIRK Programming Tools
KIRK Administration Program
The KIRK Administration Program software is required to program the KWS1500. The
Administration Program provides a graphical user interface that allows the programmer
to add KIRK Analog Interface Cards, register handsets, perform Base Station cable delay
measurements, and control many other options within the solution. A laptop PC and
NULL modem cable are required for connection to the KWS1500. Check for the latest
software revision of the Administration Program
.
KIRK Service Tool
The KIRK Service Tool software is used to connect KIRK Repeaters to specific Base
Stations. The Service Tool can also be used to assign the standby text presented when
activating handsets. A laptop PC and KIRK Repeater Programming Cable are required to
connect to a KIRK Repeater. Check for the latest software revision of the Service Tool at
Service cables
Service cables connect the KWS1500 to Base Stations and PBX Analog lines.
Cable Function
Cable Type
Description
Base Station Interface
(1330 5200)
25-pin male
Connection from the KWS1500 to the IDF.
Each cable supports 8 Base Stations.
Analog Interface
(1330 4300)
25-pin female
Connection from the KWS1500 to the IDF.
Each cable supports 8 analog PBX connections.
US Cable Package
(1330 6001)
Cable Kit
Includes one each of the following:
Base Station Interface cable
Analog interface card cable
KWS1500 server power cable
NULL modem programming cable
Programming cables
Programming cables are used to connect the installation professional’s programming PC
to the KWS1500, KIRK Repeaters, and, in some cases, Handsets for programming
additions and changes. (Power supplies not listed.)
Kit Parts Description
Connects a laptop PC to a KIRK Repeater
for programming assignment of the
Repeater to a Base Station.
Service Tool Software
Y-splitter cable
Repeater Serial-RJ cable
Repeater
Programming Kit
(0231 9508)
NULL modem cable
Connects a laptop PC to the KWS1500.
Allows connection from the
Administration Program.
KWS1500
Programming Cable
(part of 1330 6001)
Y-splitter cable
Serial – RJ cable
Connects a laptop PC to the Handset via
the Service Tool.
Same as Repeater Programming Kit.
Handset
Programming Kit
(0231 9508)
72160400_issue_B
30