PLUS Vision U7-137SF - Manual (Page 11)

E-11
Names of the Remote Control Parts
Precautions
Handling of the Remote Control
* Do not drop the remote control or handle it inappropriately.
* Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry
immediately.
* Try to avoid use in hot and/or humid locations.
* Remove the battery from the remote control when it is not going to be used for a long period.
* Some operations (such as menu operations) are available only through the use of the remote control and attention
should be given to its careful handling.
Names of Parts the Remote Control Unit Included with
the U7-132SF, U7-132hSF and U7-137SF
FREEZE MUTE
LASER
AUTO
TIMER
VOL ZOOM
RGB VIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q
1 2
3 4
VOL button [E-28]
(Volume adjustment)
STANDBY button [E-22, 24]
This button is used to switch ON
the power aand set the unit to the
STANDBY mode.
AUTO button [E-27]
(Automatic adjustment of the RGB
moving image)
Buttons used for menu operations
[E-39]
The
, , and buttons are
the select ( ̆, ̄, ̇ and ̈) buttons.
FREEZE button [E-28]
(Freezes moving pictures)
MUTE button [E-28]
(Temporarily cancels the video and
audio)
TIMER button [E-30]
(Presentation timer time setting
display)
ZOOM button [E-29]
(Digital zoom adjustment)
Buttons used for input selection
[E-27]
RGB button and VIDEO button
(VIDEO / S-VIDEO)
LASER button [E-31]
(Turns the laser point on and off)
QUICK button [E-36]
(Displays a simplified menu)
Buttons used for the PC mouse
function [E-32]
(JOG button and R-CLICK button)
Number buttons [E-34]
(Used for the security lock.)
Infrared transmitter [E-12]
Laser transmitter [E-31] L-CLICK button [E-32]
Note:
If a button on the remote control unit is held in continuously for approximately 30 seconds, signal transfer will be suspended. To resume
transferring signals, press the button again.
Also, to use the jog button after signal transfer has been suspended, first press any other button, then press the jog button.