Panasonic KX-FT901BX - Manual (Page 36)

5. Fax
36
5.8.2 Activating FAX ONLY mode
1 Make sure feature #05 is set to “ FAX ONLY”
beforehand (page 47).
2 Press {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
L The {AUTO ANSWER} indicator turns
ON.
How faxes are received
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
Note:
L The number of rings before a call is answered
in FAX ONLY mode can be changed (feature
#07, page 47).
5.8.3 Activating TEL/FAX mode
1 Make sure feature #05 is set to “ TEL/FAX”
beforehand (page 47).
2 Press {AUTO ANSWER} repeatedly to
display the following.
TEL/FAX MODE
L The {AUTO ANSWER} indicator turns
ON.
3 The ringer volume setting should be ON
(page 14).
How phone calls and faxes are received
1. “ INCOMING CALL” will be displayed but the
unit will not ring.
2. The unit will wait for the duration of 2 rings
before answering the call.
L The number of rings is determined by the
“TEL/FAX delayed ring setting” (feature
#09, page 47).
L During this time, an extension telephone
(if connected) will ring.
3. The unit will answer the call and try to detect
a fax calling tone.
When a fax calling tone is detected
The unit receives the fax automatically
without ringing.
When a fax calling tone is not detected
A If you recorded your TEL/FAX greeting
message (page 40), it will be played for the
caller (KX-FT907 only).
B The unit will ring 3 times. You may answer
the call.
L The number of rings is determined by the
“Silent fax recognition ring setting”
(feature #30, page 48).
AUTO ANSWER
{ STOP}
AUTO ANSWER
FT-901-903-907BX.book Page 36 Monday, March 29, 2004 10:03 AM