Planar PDP 60B - Manual (Page 45)

Time setting
Current Time should be set first for this setting.
Current Time acts only when the main power button of monitor is pressed. To maintain this function,
use the sub power button or power button of remote control.
Press button to move to the item
Press button to enter to sub menu.
Select "On Time" or "Off Time" with button on the left.
Press button after adjustment to return to the previous menu.
Move to "Hour" with button and then adjust the desired "Hour" with the
button
Move to "Minute" with button and then adjust the desired "Minute" with the
button
Move to "Off" with the button on the left and then select "On" with the
button.
Press button.
Move to "AM" with button and then select "AM" or "PM" with the
button.