Planar PDP 60B - Manual (Page 24)

Turning on PDP monitor
Selecting input signal
Before turning on the PDP monitor
Insert the power plug.
Connect external equipment properly.
Please use only after carefully reading this manual.
Turning on the PDP monitor
First check the power connection and check the connection of external equipment.
Power On/Off
How to turn on PDP monitor - Press the "Main Power Button (A/C input button)" of monitor
and then press the Sub-power button.
Turn on/off by remote control - Press the power button of remote control (If the monitor is
not turned on, check if the "Main Power Button" on the moni-
tor's main body is pressed first. If the "Main Power Button"
is pressed, the power indication lamp will be turned on.)
Turning off PDP monitor - Pres s "Sub-Power Button" on the monitor and then press the
"Main Power Button". - You can have the power saving effect
(Power Consumption Zero) the same as if you unplugged the
power cord.
If ON Time settings are made, make sure that you turn off the monitor with "Sub-Power
Button" or remote control.