Planar PDP 60B - Manual (Page 16)

Connecting VCR
Watching the VCR
Connecting VCR
1. Turn on the PDP monitor and press input selection button of the remote control.
2. Use button to select composite or S-Video (When it is connected to S-Video terminal) and then
press button. (When selecting S-Video, Audio should be connected to S-video Audio terminal.)
3. Turn on the video, insert the tape and then press the Playback button.
Connecting to Composite Video terminal
Connect Video/Audio connection line to Composite [(yellow is for Video,
white is for Audio (left), red is for Audio (right))] of PDP and Video/Audio
output terminal of the video.
Connecting to S-Video terminal
(Use S-Video connection line for better image.)
Connect S-Video connection line to PDP S-Video terminal and S-Video
terminal of video.
Connect Audio connection line to PDP S-Video Audio input terminal and
Audio output terminal of video.
< VIDEO >