Precor Low Impact 9.31 - Manual (Page 34)

Owner’s Manual: Advanced Programming and Troubleshooting 32
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you are
interested in learning how to:
• Change the display to U.S. Standard or Metric
• Enable or disable password protection
• View the odometer
• Display the number of hours you have used your treadmill
• View the software versions and part numbers
• Check the error log
Advanced Programming Tips
• Always start at the scrolling Precor banner.
• The advanced programming and diagnostic mode is
accessed by pressing the RESET key while the Precor
banner is scrolling. The remaining key presses must occur
quickly and without pause.
• Use the SELECT and arrow keys while in the diagnostics
mode.
• The function of the QUICKSTART key is disabled while in
diagnostic mode.
• Exit the diagnostics mode by pressing the RESET key for
two or more seconds. The display remains blank for one
second and any additional key presses are ignored.