Precor Low Impact 9.31 User Manual
Page 20

Owner’s Manual: Display Console
18
RESET: During pause mode, press the RESET key to
display a WORKOUT SUMMARY. Press RESET again
to return to the Precor banner. No workout statistics are
saved.
QUICKSTART: Press QUICKSTART to bypass the
setup prompts and start your workout immediately
using the Manual program. Refer to Choosing
QUICKSTART.
STOP: A firm tap on the red STOP button slows the
running belt to a stop and the treadmill enters pause
mode. To resume, enter your password and press the
SPEED
▲ key. Refer to Pausing During a Workout or
SELECT: The SELECT key has two functions:
• To select a program
• To change features displayed during a workout; refer
to Changing the Display Features Using the
SELECT Key.
SPEED
▼▲: Press and hold the SPEED arrow keys to
increase or decrease the running belt speed from 0 to
11 mph (1 to 18 kph) in 0.1 increments.
When you press the arrow keys, a target speed
appears in the display. The running belt speed changes
to meet the target, but the change occurs gradually so
the transition is smooth.
During your workout, to view your current speed, tap
either SPEED
▼ or ▲ key. To change the speed, press
the arrow key for more than one second.
Note: During the setup phase, pressing the SPEED
arrow keys will not affect the speed. However, the
arrow keys do affect what appears on the display. Refer
to Selecting a Program.