Paradyne HOTWIRE 8310 MVL - Manual (Page 89)

B-1 8000-A2-GB26-00 May 1998
Traps
B
Traps are configured via a Telnet or terminal session. The addition or removal of
a card or another hardware component within the Hotwire DSLAM system causes
a trap to be generated. These traps indicate a configuration change notification
(CCN) of a card (a hardware replacement or a software upgrade).
DSL Card Traps
The DSL card sends the following traps.
Event Trap Class Comment Trap # – MIB *
Device failure major AN’s operating
software has
detected an internal
device failure. 15–sys
Selftest failure minor Sent if any portion of
the AN’s
restart/selftest fails. 16–sys
CCN (Configuration
Change Notice) warning Configuration
change caused by
one the following
events:
H software
download
H configuration
download
H card removed
(objective)
7–sys
* MII = MIB ll, ent = Entity MIB, dsl = hotDSL Enterprise MIB, sys = hotSys Enterprise
MIB, dhcp = DHCP Enterprise MIB, diag = hot_diag.mib