Paradyne HOTWIRE 8310 MVL - Manual (Page 28)

Hotwire Menus and Screens
2-10 8000-A2-GB26-00 May 1998
NOTE:
The login ID and password are case sensitive; that is, the system recognizes
both upper- and lower-case letters. For example, if you enter your user name
and password information in upper case letters and your assigned user name
and password are in upper- and lower-case letters, the system will not let you
log in.
After entering your login ID and password, the system displays the Hotwire
Chassis Main Menu.
Card Selection Screen
From the Hotwire Chassis Main Menu, select Card Selection to display the status
of any of the 18 cards present in the chassis by type and slot number. The Card
Selection screen also displays general and interface status for each card.
This display shows the following:
— There is an 8510 card in Slot 1
— Position 1 – no current test ( _ )
— Position 2 – major alarm is present (M)
— Position 3 – no current test ( _ )
— Position 4 – Ethernet link is down (D)
— Position 5 – DSL port 1 is up (U)
— Position 6, 7, and 8 – DSL ports 2, 3, and 4 are disabled (X)