Paradyne HOTWIRE 8310 MVL - Manual (Page 35)

4-1 8000-A2-GB26-00 May 1998
Configuring the Hotwire DSLAM
4
Overview
The Hotwire DSLAM enables you to configure and manage the Hotwire MCC and
DSL cards. This chapter describes the basic card configuration instructions.
Configuring the MCC Card and DSL Cards
Use the procedures in the following order to configure the MCC card and DSL
cards for the basic setup for terminal management and user data connectivity.
For detailed information on these instructions, see Chapter 5,
8310 MVL and
8510 DSL Card Configuration.
NOTE:
For more information about MCC and DSL card configuration and
management, consult the
Hotwire DSLAM for 8310 MVL and 8510 DSL
Cards Network Configuration Guide.