Psion Teklogix MLP 3040 Series - Manual (Page 34)

Printer Configuration
Key1: 1234567890
WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
– OR –
Key1: 0123456789
01234567890ABCDE
Possible Values: 10 or 26 character user specified hexadecimal string
Note that this feature is only available if WLAN WEP Bits is set to 64 or 128.
This feature specifies an encryption “key” or password that is used to encrypt/decrypt data on the network. If
WLAN WEP Bits is set to “64”, a ten character hexadecimal string must be entered that matches the key on the
other nodes the printer will be communicating with. If WLAN WEP Bits is set to “128”, a 26 character
hexadecimal string must be entered.
WLAN Auth WLAN Auth
Auto
Possible Values: Auto*, Open, Shared
This feature specifies the authentication method that will be used when establishing connections on the network.
The method may be to use an open key or a shared key. If set to “Auto”, the printer will automatically match
itself to the method used by other nodes.
IP Address Assign IP Addr Assign
DHCP
Possible Values: DHCP*, Static
This features specifies whether the printer will obtain an IP address from a DHCP server, or if an IP address
will be manually assigned.
IP Address IP Address
0.0.0.0
Possible Values: 0.0.0.0*, User specified
This feature specifies the IP address for the printer.
Note that this feature has no effect if IP Address Method is not set to “Static”.
28