Psion Teklogix MLP 3040 Series - Manual (Page 24)

Printer Configuration
Font Font
16.9 cpi Courier
Possible Values: 4.2 cpi SnsSrfA 16.9 cpi SnsSrfA
5.5 cpi SnsSrfA 16.9 cpi Courier*
10.2 cpi SnsSrfA 18.5 cpi SnsSrfA
10.7 cpi SnsSrfA 18.5 cpi Courier
12.7 cpi Courier 20.3 cpi SnsSrfA
13.5 cpi Courier 20.3 cpi Courier
14.5 cpi Courier 22.6 cpi Courier
15.6 cpi Courier 25.4 cpi Courier
Any downloaded fonts will also be displayed.
This feature selects the default font and character pitch.
Spacing Spacing
3 Lines
Possible Values: 0 … 3* … 10 Lines
When printing text, this feature sets spacing between lines. The height of a complete line, or line pitch, is
determined by adding the vertical size of the current font to the Spacing. With Spacing set to the default value
of “3” and using a font that is 23 rows high, the line pitch would be 3 + 23, or 26 dot rows. Since each dot row
is 0.125mm, 26 x 0.125 yields a line pitch of 3.25mm or 7.8 lines per inch. This line pitch value also
determines the amount of paper motion performed when an ASCII Line Feed character is received by the
printer.
When printing PC Line drawing characters, Spacing should be set to “0” to avoid space between rows of
characters used to draw vertical lines.
When printing graphic data, Spacing has no affect so that multiple lines of graphics may print adjacent to each
other.
Left Margin Left Margin
0.0000”
Possible Values: 0.0000”* … 1.0244” in increments of 0.0394”
This feature sets the left margin in inches relative to the leftmost printing position. The left margin must be less
than the right margin.
18