POLAR S610i - Manual (Page 8)

A 6
STOP
SIGNAL
/
LIGHT
RESET
OK
Signal/Light Turns the beep on or off.
Turns the backlight on.
Reset Resets the heart rate monitor.
Stop Return - Stops measuring the heart rate.
Exits the displayed mode and returns to
the previous mode level.
Returns to the Time of Day display
from any mode by pressing and
holding the stop button.
OK Accept - Starts measuring the heart rate (start).
Enters the displayed mode shown on
the lower level (start). Locks in your
selection (ok). Records lap information
(lap). The Help text (start, ok or lap)
that appears on the display above the
button indicates its use.
Buttons and Their Functions