POLAR S610i - Manual (Page 63)

E 61
or
B) an optional Polar IR Interface for USB port and Windows® 98 operating
system or later in your computer.
Install the Polar Precision software (version 3 or later) first, then connect
the optional Interface to the corresponding port of the computer before
starting the software.
1. Start the Polar Precision Performance software.
2. Scroll up or down until CONNECT is displayed in the receiver display.
Point the infrared window of the receiver towards the infrared window
of the computer or an optional Interface. The maximum infrared
transfer distance is 20 cm/ 8" and the infrared transfer angle
±
15
degrees.
3. On the toolbar of the software, click on the heart rate monitor
Connection icon and hold the receiver steady. A new window
"Infrared Connection" appears.
4. The receiver automatically starts to communicate with the software as
Infrared appears. Follow the instructions on the computer screen to
proceed with downloading exercise files or uploading heart rate
monitor settings.
Your heart rate monitor offers you the option of preparing your settings
with Polar Precision Performance software. You are also able to set
following functions with the software:
• a user ID, user name or logo for easier receiver recognition in
multi-user situations
Uploading Settings from Computer