POLAR S610i - Manual (Page 51)

C 49
Restarting the Interval or Recovery Calculation
In the Exercise mode press the stop button to pause the interval or recovery
calculation. Reset the calculation by pressing and holding the down button.
To restart the same calculation press the OK button. To reset the interval
training exercise, see “Resetting Stopwatch to Zero” section.
Interrupting an Interval or Recovery Calculation
Press and hold the OK button during your interval training exercise session
to interrupt the calculation. The following section automatically starts. Ex.
if you interrupt an interval your recovery calculation (if set on)
automatically starts.
Interrupting a Phase of an Interval Training Exercise
Press the stop button to pause your phase. Press and hold the OK button.
The following phase automatically starts.
Heart Touch Function
The heart touch function is activated as you bring the wrist receiver near
the transmitter’s Polar logo.
You have three display alternatives for the heart touch function. To select
you heart touch display, use your Polar Precision Performance software:
• Checking the current heart rate limits
• Swapping the three or four (if interval on) display options
• Storing lap time
During the heart touch, the backlight is on for a couple of seconds, if you
have already used the backlight during the exercise.