Creating a login, Procedure – Paradyne Hotwire 7975 User Manual

Page 74

Security

7-2

7975-A2-GB20-40

December 1998

Access level is also used to control access via Telnet. If the Telnet Session
Access Level is set to Administrator (see Table A-5,

Telnet Session Options

), a

Creating a Login

Logins apply to the terminal directory connected to the communication port or
Telnet access directly to the ATI of the 7975 Standalone Termination Unit.

Six login ID/password combinations are available. Each Login ID and Password
must be unique and include an access level.

Procedure

1. To create a login record, follow this menu selection sequence:

Main Menu

→

Control

→

Administer Logins

main/control/admin_logins

Hotwire

Model: 7975

ADMINISTER LOGINS

Page 1 of x

Login ID:

newuser

Access Level:

Administrator

Are you sure? Yes

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

ESC for previous menu

MainMenu

Exit

Save PgUp PgDn

New

Delete

ОО

2. Select Newuser and press Enter. The Login Entry screen is displayed.

main/control/admin_logins

Hotwire

Slot: 4

Model: 7975

LOGIN ENTRY

Login ID:

newuser2

Password:

es342

Re-enter Password:

es342

Access Level:

Administrator

WARNING

New logins will not become permanent until saved

through the “ADMINISTER LOGINS” screen!

Ctrl-a to access these functions

ESC for previous menu

MainMenu

Exit

Save

ОО