Panasonic KX-FC238HK - Manual (Page 72)

9. Programmable Features
70
Note:
L The following items will be deleted or reset to
their default settings:
–
Settings listed on page 66 (not including
items using the base unit PIN)
– Redial list
– Voice enhancer
– Category names
– Category ring tones
L The following items will be retained:
–
Handset phonebook items (category
names and ring tones will be reset to their
default settings.)
– Date and time
9.5.8 Programmable functions
using the base unit PIN
Helpful hints:
L To exit programming, press {ih} at any
time.
9.5.9 Call Options
Changing the flash time
Change the flash time of the handset, if
necessary, depending on the requirements of
your service provider or PBX.
1. Press {j/OK}.
2. Select “ Base Unit Setup”, then press
{>} .
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 71).
4. Select “ Call Options”, then press {>}.
5. Select “ Recall”, then press {>}.
6. Select the desired setting, then press {>}.
7. Press {ih}.
Setting pause length
Change the pause length of the handset, if
necessary, depending on the requirements of
your service provider or PBX.
1. Press {j/OK}.
2. Select “ Base Unit Setup”, then press
{>} .
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 71).
4. Select “ Call Options”, then press {>}.
5. Select “ Pause Length”, then press {>}.
6. Select the desired setting, then press {>}.
7. Press {ih}.
{ih}
{j /OK}
{>}
{ C/T}
FC238HK-PFQX2217ZA_en.book Page 70 Wednesday, July 27, 2005 11:02 AM