Philips FW-D1 - Manual (Page 34)

3139 115 20054
34
English
CD
2 Press Ç to stop programme playback.
Notes:
– If you press any of the CD DIRECT PLAY
buttons, the system will play the
selected disc or track and the stored
programme will be ignored temporarily.
The
PROG display also will disappear
temporarily from the display. It will
reappear when playback of the selected
disc ends.
– REPEAT DISC mode is not available
when programme playback begins.
Erasing the programme (when
playback is stopped)
• Press Ç.
™ "PROGRAM CLEARED" will be
displayed.
Note:
– The programme will be erased when the
system is disconnected from the power
supply or when the CD carousel tray is
opened.
Shuffle (only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ "SHUFFLE" will be displayed.
™ The
SHUFFLE , the disc and the track
selected at random appear on the
display.
• The discs and the tracks will be played
in random order until you press Ç.
• If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
™ "TRACK" or "ALL DISC" will be
displayed.
™ The REPEAT and SHUFFLE appear on the
display.
2 Press SHUFFLE again to resume normal
playback.
™ The
SHUFFLE disappears from the
display.
Note:
– REPEAT DISC mode is not available
when shuffle is selected.
Repeat (only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
1 Press REPEAT on the remote control to
select the various repeat modes.
™ "TRACK", "DISC", "ALL DISC" or
" OFF" will be displayed.
™ The REPEAT appears on the display.
• The selected track, selected disc or all
available discs will now be played
repeatedly until you press Ç.
2 Press REPEAT until the " OFF" mode is
displayed to resume normal playback.
™ The
REPEAT disappears from the
display.
Notes:
– REPEAT DISC mode is not available
during programme play or shuffle mode.
– You can also repeat shuffling a
programme.
™ "TRACK" or "PROGRAM" will be
displayed.
™ The REPEAT , PROG and SHUFFLE appear
on the display.
pg 001-41/D5-D1/21-Eng new 6/8/01, 11:33 AM 34