Philips FW-D1 - Manual (Page 23)

3139 115 20054
23
English
The following items can be adapted:
Picture
– TV Shape
See ‘Initial Setup’
– Black level shift (NTSC only)
Adapts the colour dynamics to obtain
richer contrasts. Select ON or OFF.
– Video shift
The factory centres the video on your
screen. Use this setting to personalize
the position of the picture on your TV by
scrolling it to the left or right.
Sound
– Digital output
Factory setting: ALL. This means that
digital output is switched on. If you are
not connecting equipment with a digital
input, change the setting to OFF.
If your equipment doesn’t include a
digital multi-channel decoder, set the
digital output to PCM (Pulse Code
Modulation).
– Analogue output
Select Stereo, Surround, 3D Sound or
Multichannel.
Note:
– After selecting the desired Analogue
Output , if the message appeared on the
TV OSD and the system display screen
do not match with the setting, press
SURROUND CONTROL (or SURR on the
remote control) until the selected
setting reached.
– Night Mode
Optimises the dynamics of the sound
with low volume playback.
– Karaoke vocal (not available for all
versions)
Put this setting to ON only when a
multi-channel karaoke DVD is being
played. The karaoke channels on the
disc will then be mixed into a normal
stereo sound.
– Speaker
Allows you to select speaker settings,
volume balance and delay time and to
test the speaker settings.
Speaker settings are only active on the
Analogue Multi-Channel Output (see
Appendix - page 30).
Language
Select the required Menu, Audio and
Subtitle language. See ‘Initial Setup’.
Audio language and Subtitle language can
also be adapted via the Menu bar on the
screen.
Features
– Access Control
Access Control contains the following
features:
Child Lock…When Child Lock is set to
ON, a 4-digit code needs to
be entered in order to play
discs.
Parental control…Allows the
conditional presentation of
DVDs containing Parental
Control information. (see
‘Access Control’)
– Status Window
Displays the current status of the player
and is displayed with the menu bar.
When disc playback is stopped, it is
displayed with the ‘Temporary Feedback
Field’ in the default screen.
Factory setting is ON. Select OFF to
suppress display of the Status
Window.
– Low power Standby (not applicable
for this model)
– PBC (Playback Control)
The PBC can be set to ON or OFF (only
applicable for Video CD playback).
– Beeper (not applicable for this model)
The beeper can be set to ON or OFF.
DVD-VIDEO
pg 001-41/D5-D1/21-Eng new 6/8/01, 11:33 AM 23