Philips FW-D1 - Manual (Page 30)

3139 115 20054
30
English
Storing an FTS Program
1 Load a disc and stop playback.
2 Use
4 to go to the list of available
tracks.
3 Use 1 or 2 to select tracks from the list.
To go directly to any track, enter the
track number using the digit keys (0-9).
4 Store each track by pressing OK.
™ The track numbers will be added to
the list of selected tracks.
™ The number of tracks and the playing
time of the programme will be
shown on the screen and the player
display.
When your FTS Program is complete, press
É(PLAY) to start play, or Ç to go back to
Stop mode. In either case, the FTS Program
will be automatically memorised.
DVD-VIDEO
Appendix
6 Channel settings
Front speakers
L (Large):
When the front speakers can
reproduce low frequency
signals below 120Hz
S (Small): When the front speakers
cannot produce low frequency
signals below 120Hz
Centre speaker*
L (Large):
When the centre speaker can
reproduce low frequency
signals below 120Hz
S (Small): When the centre speaker
cannot produce low frequency
signals below 120Hz
Off: When the centre speaker is not
connected.
Surround speakers
L (Large):
When the surround speakers
can reproduce low frequency
signals below 120Hz
S (Small): When the surround speakers
cannot produce low frequency
signals below 120Hz
Off: When the surround speakers
are not connected.
Subwoofer
On:
When you connect a subwoofer
Off: When the subwoofer is not
connected.
* You can use your TV as centre speaker.
When centre speaker is turned on, the
audio L/R as well as the audio from the
scart will contain the centre speaker
audio.
TV Front speaker
right
Front speaker
left
Center
speaker
Rear speaker
(left surround)
Rear speaker
(right surround)
Delay times
The DVD player is set to reproduce
correctly synchronised Digital Surround
Sound in a listening area where the
surround speakers are about 150cm nearer
to the listening position than the front
speakers, and the centre speaker is in line
with the front speakers. To adjust for other
listening area arrangements, certain delay
times required.
Switching FTS ON/OFF
1 Use
3 or 4 to move to the top.
2 Use 1 or 2 to select either ON or OFF.
Erasing a track from an FTS-
programme
1 Use
4 to go to the list of selected
tracks in programme.
2 Use 1 or 2 to select the track number
you wish to erase.
3 Press OK.
™ The track number will be erased from
the list of selected tracks.
Erasing the complete programme
• Use
4 to select CLEAR ALL and press
OK.
™ The complete FTS programme for the
disc will be erased.
pg 001-41/D5-D1/21-Eng new 6/8/01, 11:33 AM 30