Proxima ASA PL-300E - Manual (Page 48)

Switching Between Input Sources
40 ProjectionLink User & Installation Guide
To switch between sources, use one of the following steps.
• Press the button located above each of the ProjectionLink
transmitter’s connection areas. The LED in each area
turns green.
Switching between input sources
OR
• Press the Source button on the projector remote control.
As you switch between input sources, the transmitter’s
indicator light turns green. The source button is only avail-
able if the RS-232 control port is connected from Projec-
tionLink to your Projector. For more information on RS-
232 connections, see pages 10 to 20.
You can only use one video source per connection
area. If you connect a second video source, be sure
to connect it to the second video connection area on
your ProjectionLink system.