Proxima ASA PL-300E - Manual (Page 37)

ProjectionLink User & Installation Guide 29
Chapter 3:
Configuring ProjectionLink
The ProjectionLink transmitter and receiver power up auto-
matically when power is connected. Power must be connected
to both the transmitter and the receiver for ProjectionLink to
work properly.
The power switch on the ProjectionLink transmitter remotely
powers the projector from standby mode. In order to power
the projector remotely from ProjectionLink, you must connect
the projector to the RS-232 connection on the receiver (see
pages 10 through 17 for information on connecting the
RS-232 port).