Mounting the transmitter in a rack – Proxima ASA PL-300E User Manual
Page 45
Mounting ProjectionLink
ProjectionLink User & Installation Guide
37
Mounting the Transmitter in
a Rack
The ProjectionLink transmitter also incudes rack mounting
ears. Make sure to secure the mounting ears with the 8 mm
screws included with ProjectionLink.
To install the ProjectionLink rack mounting ears:
1. Remove the screws on the sides of the transmitter.
2. Attach the mounting ear with four of the 8 mm screws
from the Hardware Kit included with ProjectionLink. The
mounting ears are symmetrical and work on either the left
or right side.
3. Attach the transmitter with mounting ears to the rack using
the four #10-32 screws from the Hardware Kit.
Transmitter with 19-inch rack mount