Proxima ASA PL-300E - Manual (Page 12)

Understanding the ProjectionLink System
4 ProjectionLink User & Installation Guide
Understanding the
ProjectionLink System
The ProjectionLink system offers many advantages over previ-
ous mounted projection systems. It also has a few limitations
you should be aware of. The following tables lists some fea-
tures the ProjectionLink system can and cannot do:
Your ProjectionLink system
will:
Your ProjectionLink system
will not:
Eliminate the need for expensive
coaxial cables and amplifiers Facilitate high-bandwidth appli-
cations (greater than 140 MHz)
Conveniently switch between
presentation devices (e.g., com-
puter to video) Replace a matrix switcher
Reduce installation time Replace a distribution amplifier
Allow RS-232 control from
external control systems such as
Crestron or AMX/Panja Encode or decode video signals
Easily connect your installed
projector to your presentation
devices Accept multiple video signals on
each video input
Increase the number of com-
puter and/or video inputs on
your projector
Support Picture-in-Picture since
only one video signal at a time is
sent to the projector
Accept HDTV component (Y,
Pb, Pr) video