Proxima ASA PL-300E - Manual (Page 41)

Configuring ProjectionLink
ProjectionLink User & Installation Guide 33
The second adjustment is color. The color controls are located
on the bottom of the receiver.
Gain Adjustment and Color Control Settings
Use the following steps to make the color adjustments:
1. Connect the CAT-5 cable to both the transmitter and
receiver.
2. Connect a computer to ProjectionLink and display a test
image. If you don’t have a test image go to www.Prox-
ima.com to download one. Any white grid on a black
background will work well.
3. Carefully examine the center of the projected image. You
should only see a white vertical line. If you see any
colored lines to the left of the center line, adjust the color
controls.
Color Control Settings Color Control Settings Color Control Settings Color Control Settings
Gain Adjustment Gain Adjustment Gain Adjustment Gain Adjustment
RRRR BBBB G G G G
(on left side) (on left side) (on left side) (on left side)