Proxima ASA PL-300E - Manual (Page 23)

Installing ProjectionLink
ProjectionLink User & Installation Guide 15
To the Pro AV 9350
To connect the PL 300 receiver to the Pro AV 9350, you will
need to change the order of the input/output terminals in the
projector to match the illustration on the following page. The
terminals should be moved as follows:
• HDB 15-Pin Terminal to Input-1
• DVI Terminal to Input-2
• AV Terminal to Input-3
• 5 BNC Terminal to Input-4
For more information on replacing the terminals, see “Con-
necting the Projector” in the projector’s User’s Guide.