Reference, Vhs dvd – Panasonic DMR-ES30V User Manual
Page 71
Reference
71
DVD recording, scheduled recording
Page
DVD Edit
Page
VHS Picture
Page
VHS Sound
Page
VHS Play
Page
VHS Recording, scheduled recording
Page
Cannot record.
≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the
unit can record onto.
≥The disc is unformatted. Format the disc. [RAM] [-RW‹V›]
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with
“DISC MANAGEMENT”.
≥Some programs have limitations on the number of times they can be recorded (CPRM).
≥The disc is full or nearly full. Erase unneeded titles or use another disc.
≥You cannot record on finalized DVD-R, DVD-RW (DVD-Video format), +R or DVD-RW
(DVD Video Recording format) discs.
≥If you repeatedly insert discs or turn the unit on and off about 50 times or more, the
recording or editing of DVD-R, DVD-RW (DVD-Video format), +R may be disabled.
≥A DVD-R, DVD-RW (DVD-Video format), +R recorded on the unit may not be recordable
on other Panasonic DVD recorders.
≥The material you are trying to record is copy-protected.
≥Scheduled recording will not be activated when in editing or transfer (dub). Scheduled
recording will begin after the editing/transfer (dub) is finished.
6, 64
–
–
–
–
A part or whole of a recorded
title has been lost.
≥If the power shuts down or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable. We cannot
offer any guarantee regarding lost titles or discs. You will have to format the disc
(
[RAM] [-RW‹V›]) or use a new disc.
–
Cannot format.
≥The disc is dirty. Wipe with a damp cloth and then wipe dry.
≥You tried formatting a disc that is not compatible with the unit.
Cannot create chapters.
Cannot mark the start point or
the end point during “Shorten
Title” operation.
≥The unit writes the chapter division information to the disc when you turn it off or remove
the disc. The information is not written if there is an interruption in the power before this.
≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point
before a start point.
–
–
–
Cannot erase chapters.
≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter
longer.
The available recording time
doesn’t increase even after
erasing recordings on the disc.
≥Available recording space on the DVD-R or the +R does not increase even after erasing
previously recorded titles.
≥Available recording space on a DVD-RW (DVD-Video format) increases only when the last
recorded title is erased. It does not increase if other titles are erased.
–
–
Cannot create a playlist.
≥You cannot select all the chapters in a title at once as the source of playlist edition if the title
also includes still pictures. Select them individually.
–
∫ VHS
OSD messages do not appear.
≥Go to VHS MENU and select “ON” in “OSD”.
Press [STATUS] to show the on-screen messages constantly.
The blue back appears during
play.
≥You are playing a blank or poor quality part of the tape.
≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue
back to appear. Consult your dealer.
–
–
Cannot hear the desired audio
type.
≥Press [AUDIO] to select the audio.
There is noise when playing a
video tape.
≥Adjust the tracking.
≥The tape is old or damaged.
–
Cannot play.
≥Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be
played.
–
The playback screen flickers.
≥The video head is dirty.
≥The tape is too old or damaged.
–
–
“
1” flashes when I try to start
recording.
Cannot record.
≥The erasure prevention tab has been removed. Cover the hole with adhesive tape.
Cannot record TV program.
≥The desired channel is not selected. Select the desired TV program.
–
VHS
DVD
Re
fe
re
nc
e
ES30VP&PC.book 71 ページ 2005年2月21日 月曜日 午後2時32分