Panasonic DMR-ES30V - Manual (Page 17)

Getting started
17
VQT0N92
Preparation
≥Press [DVD].
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [ 3, 4] and press
[ENTER].
[3] Select “SETUP” with [ 3, 4] and press [ENTER].
[4] Select “Channel” with [ 3, 4] and press [2, 1].
[5] Select “Signal Source (RF IN)” with [ 3, 4] and
press [ENTER].
[6] Select “Antenna” or “CableTV” with [ 3, 4] and
press [ENTER].
[7] Select “Set Channels Automatically” with
[
3, 4] and press [ENTER].
[8] Press [ENTER].
≥Auto Channel Setting starts. This takes a few minutes.
[9] Press [ENTER].
∫ To cancel in the middle
Press [RETURN].
∫ To exit the screen
Press [RETURN].
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
[1] Press the numeric buttons to select a channel.
Antenna Mode (Airwaves)
e.g.,
“5”: [0] )[5]
“15”: [1] )[5]
CableTV Mode (Cable)
e.g.,
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
≥You can also use [CH, W, X] to select a channel.
[2] Press [ADD/DLT].
e.g., The channel is deleted.
Set these guide channels so you can use VCR Plus i ® system for
scheduled recording. Before starting the settings, prepare a chart
showing the channels, station names, and guide channels.
e.g., :
° Look up the guide channels for the stations in magazines.
°° Write down all the stations you can receive.
≥If you have connected a cable TV box or satellite receiver, the
VCR Plus _ system does not work so you do not have to set the
guide channels.
Preparation
≥Press [DVD].
[1]
While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [ 3, 4] and press
[ENTER].
[3] Select “SETUP” with
[
3, 4] and press
[ENTER].
[4] Select “Channel” with
[
3, 4] and press
[ 2, 1].
[5] Select “VCR Plus r Ch.
Setting” with [ 3, 4]
and press [ENTER].
e.g., “Signal Source (RF IN)” is
set to “CableTV”.
[6] Use [ 3, 4] to select
the guide channel you
want to set and press
[
1].
≥When selecting the guide
channel, press and hold
[
3, 4] to scroll up and down
the screen quickly.
[7] Use [ 3, 4] to select
the channel corresponding to the guide channel
and press [
2].
≥To delete a number, press [CANCEL/RESET, ¢].
≥Repeat steps 5 and 6 to enter other channels.
[8] Press [ENTER].
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN].
∫ If Plug-in Auto Tuning fails
∫ Adding and deleting channels
DVD
Disc Protection Off DVD-RAM
FUNCTIONS
Schedule
Dubbing
DIRECT NAVIGATOR
SCHEDULE
1 2 3 VCR Plus+
Other Functions
Playback
ENTER
DUBBING
PLAYLISTS
FLEXIBLE RECORDING
DISC MANAGEMENT
Return
SETUP
Cartridge Protection Off
Manual Channel Captions
VCR Plus i Ch. Setting
Signal Source (RF IN)
Channel
Setup
Disc
Video
Audio
Set Channels Automatically
Channel Captions
Preset Channel Captions
CableTV SETUP
Antenna
Channel
Set Up
CableTV
Signal Source (RF IN) SETUP
The unit’s display
Channel 15 Deleted
STEP 3 Channel settings
∫ Guide channel settings for VCR Plusi
system
Station
name
Guide
channel °
Channel
number °°
Channel setting
CBS 04 04 Unnecessary
HBO 33 15
Enter channel 15 next
to Guide Channel 33.
Nickelodeon 38 20
Enter channel 20 next
to Guide Channel 38.
Manual Channel Captions
VCR Plus i Ch. Setting
Signal Source (RF IN)
Channel
Setup
Disc
Video
Audio
Set Channels Automatically
Channel Captions
Preset Channel Captions
CableTV SETUP
Channel
SetUp
Disc
Video
Audio
Display
TV Screen
VCR Plus i Ch. Settings
Guide Channel Cable Channel
---
--- 125
1
---
--- 2
3
SETUP
ENTER
Channel
SetUp
Disc
Video
Audio
Display
TV Screen
VCR Plus i Ch. Setting
Guide Channel Cable Channel
--- 4
5
6
---
--- 7
8
---
---
SETUP
ENTER
Ge
ttin
g
s
tart
e
d
ES30VP&PC.book 17 ページ ２００５年２月２１日 月曜日 午後２時３２分