Panasonic DMR-E500H - Manual (Page 18)

18
RQT7394
Ge
tt
in
g s
ta
rte
d
STEP
5
Setting up the Network
Refer to the control reference on page 16.
When connecting a computer via a router with its
DHCP enabled
Confirm “TCP/IP Settings” is set to “Automatic (DHCP)”
(
➡ page 16, step 6).
The settings on page 18–19 are not required.
When connecting a computer via a router with its
DHCP disabled
Please confirm the following were carried out correctly.
1 Check the computer’s IP address (
➡ right, step 4).
2 Enter the DVD recorder’s IP address manually ( ➡ page 19).
On the computer
1
Click [start] ➡ [Control Panel].
Double-click [Network Connections].
2
Right-click the [Local Area
Connection]
§ icon and click
[Properties].
§ A message may appear below the icon such as [Bridge
Connections] or [Network Bridge].
3
Select [Internet Protocol (TCP/IP)]
and click [Properties].
4
Check the IP address setting.
Please make a note of the “IP address”, “Subnet mask”,
“Default gateway” and “Preferred DNS server” settings
(These will be needed during DVD recorder setting).
5
Click [Cancel].
You will exit the “Internet Protocol (TCP/IP) Properties”
window.
6
Click [Cancel].
You will exit the “Local Area Connection Properties” window.
≥ Screen shots reprinted by permission from Microsoft Corporation.
To be able to operate this unit from a
computer on the Home Network
To check the computer’s IP address
7394en.book Page 18 Wednesday, March 30, 2005 9:45 AM