Important – Patton electronic 1094A User Manual

Page 3

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight

prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at:

Tel: (301)975-1007
Email: [email protected]
www: http://www.patton.com

Patton Electronics' technical staff is also available to answer any

questions that might arise concerning the installation or use of your
Model 1094A. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.

2..0

0 G

L IIN

TIIO

Thank you for your purchase of this Patton Electronics product.

This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

• DSL Distances on just two wires using HDSL technology

• DTE Speeds n x 64 to 1.152 Mbps

• 2-wire Operation

• Standalone (QuikConnect™) and Rackmount Versions Available

• SNMP Network Management with In-Band Management of Remote

Units plus Advanced Diagnostics & Statistics using Patton Model

1000MC

• Internal, external or receive recovered clocking options

• LED indicators for TD, RD, CTS, CD, DTR, TM, ER and NS

2.2 DESCRIPTION

The Patton Electronics

NetLink

HDSL

Multi-Rate DSL Modem

provides high speed 2-wire connectivity to ISPs, PTTs, and corpora-
tions using HDSL (Multi-rate Digital Subscriber Line) technology.
Multi-rate DSL offers the ability to deliver the maximum bit rate that a
twisted pair line can accommodate. Supporting multiple line rates from
144kbps to1.168 Mbps, the NetLink provides “megabyte” speeds to
leased line, LAN to LAN interconnection, and WAN access networks
over 2.9 miles/4.7km (1.152Mbps on 24AWG/.5mm wire).

The

NetLink

HDSL

standalone allows DTE speeds from

64kbps to 1.152Mbps in increments of 64kbps. Features include loop-
back diagnostics, inband SNMP/HTTP remote management capabili-
ties and externally accessible configuration switches. A high density
2U-high rack card version of the

NetLink

HDSL

is also available.

As a symmetric DSL NTU,

NetLink

HDSL

offers the same data

rates in both directions over a single pair of regular telephone lines
using 2B1Q modulation. Featuring replaceable DCE-DTE interface
modules, the NetLink HDSL can be configured for a huge range of
V.24/RS-232, V.35, RS-422/530, G.703 and X.21 applications. Line
connection is made by an RJ-45 jack. The standard Model 1094A is
powered by a 100/230VAC(Universal) supply. The DC power supply
option supports any DC input between 40-60VDC.

IMPORTANT:

The Model 1094A is equipped with flash

upgrade. Please refer to Patton website, http://www.patton.com
or contact Technical Support for the latest version of the soft-
ware.

NOTE:

Packages received without an RMA number will not be

accepted.