Figure 3: connecting to a dpoe power patch panel – Panduit PN380 User Manual
Page 11
PANDUIT DPoE Power System User’s Guide
Issue 1.0
Part Number: PN380
Butt splices connectors
Power connector
housing with wire leads
48VDC
Supply
Power Connector on
rear side of DPoE
Power Patch Panel
Connector
pinouts
Figure 3: Connecting to a DPoE Power Patch Panel
NOTE:
The included power harness has two wires for the A-feed power only (pins
1 & 2). The DPoE Power Patch Panel supports an optional redundant B-
feed power option, but the terminals and wire leads are not attached to the
power harness.
Contact PANDUIT Technical Support for more information about
connecting the redundant B-Feed power.
WARNING:
The power supply connections on the DPoE Power Patch Panel are
polarized.
The DPoE Power Panel will not function if power is wired improperly.
6