Time search, index search 37, English, Time search – Philips DVP3200V/37B User Manual

Page 37: Helpful hints index search

English

Time Search, Index Search 37

Time Search

Follow the steps below to search forward or backward on a tape
a specific length of time. There must be a tape in the cassette
compartment.

Press VCR, then press SEARCH repeatedly until the
TIME SEARCH screen appears.

• Time Search and Index Search

are not available during
recording.

• To remove a Search Display, press

CLEAR.

• To cancel a search, press

STOP C.

Helpful Hints

Index Search

An Index Mark is made automatically at the beginning of each
recording. Essentially, an Index Mark is a “bookmark.” Find the start
of a recording by following these steps.

Press VCR, then press SEARCH repeatedly until the
INDEX SEARCH screen appears.

Within 30 seconds, press K or L until the number of
programs you want to skip appears beneath INDEX
SEARCH. Include the current program in your number.

Within 30 seconds, press s (for a reverse search) or B
(for a forward search). When the tape finishes rewinding or
forwarding, playback will start. The program numbers will
count down beneath INDEX SEARCH during the search.
If the end of the tape is reached during the search, the search
will stop and the tape may rewind. Details are on page 38.
Recordings should be at least

1 minute long in SP speed, 2

minutes in LP, and 3 minutes in SLP. Otherwise, the Index
Mark will not be available. Details on tape recording speeds are
on page 67.

TIMER SET

REPEAT

A-B

CLEAR

REC MODE

MODE

TITLE

TV/VIDEO

VCR

DVD

VCR Plus+

SUBTITLE

AUDIO

ANGLE

ZOOM

DVD

SETUP

DISC/VCR

DISPLAY

BACK

PLAY

REW

FFW

PAUSE

TIME SEARCH

- : - -

Within 30 seconds, press K or L until your desired
length of time appears. Or, press and hold K or L until
you reach the desired length of time.
You can set a Time Search for up to 9 hours and 59 minutes
(9:59).

Within 30 seconds, press s (for a reverse search) or B
(for a forward search). The VCR begins rewinding or fast
forwarding the tape.When the tape finishes rewinding or fast
forwarding the time you specified, playback will begin.
The time will count down beneath TIME SEARCH during the
search.
If the end of the tape is reached during the search, the search
will stop and the tape may rewind. Details are on page 38.

INDEX SEARCH

– –

2-3