Philips DVP3200V/37B - Manual (Page 22)

TV/VIDEO VCR DVD VCR Plus+
SUBTITLE AUDIO ANGLE ZOOM
DVD
SETUP MENU
DISC/VCR
DISPLAY
TIMER SET
BACK
PLAY
REW FFW
PREV NEXT PAUSE
REC STOP
OK
REPEAT
REPEAT
A-B
CH
+
-
CLEAR
REC MODE SEARCH MODE TITLE
English
22 Clock (VCR)
• If the clock has never been set,
the CLOCK SET menu may
appear when you press
DISC/VCR MENU. If so, follow
the instructions from step 3
above.
• Press DISPLAY repeatedly to
show the time on the TV
screen.
• Power failures of more than 30
seconds can erase the clock
setting.
• To reset the clock, follow steps
1-2. Select the information you
want to change using s or B.
When the information is
flashing, use K or L to enter
the correct information. Press
CLEAR to set the clock.
Helpful Hints
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
0 3 / 1 9 – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 MON 2 0 0 6
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
Follow these steps to set the VCR clock. Make sure:
1 Press VCR, then press DISC/VCR MENU so MENU 1
appears. If the clock has never been set, the CLOCK SET
menu may appear when you press DISC/VCR MENU. If so,
follow the instructions from step 3 on this page.
2 Press K or L to select CLOCK SET. Then, press B.
3 While the MONTH space is flashing, press K or L
until the month appears. Then, press B.
4 While the DAY space is flashing, press K or L until
the day appears. Then, press B.
5 While the YEAR space is flashing, press K or L
until the year appears. Then, press B. The day of
the week will appear automatically.
6 While the HOUR space is flashing, press K or L
until the hour appears. Then, press B.
7 While the MINUTE space is flashing, press K or L
until the minute appears. Then, press B.
8 While the AM or PM space is flashing, press K or L
to point to AM or PM.
Your selection will flash on the screen in the AM/PM space.
9 Press CLEAR or B to start the clock.
1
2-9
9
E8A21UD_EN1 5/29/06 3:13 PM Page 22