Pentax Optio 555 - Manual (Page 29)

27
2
Qu
ick Start
Still images can be played back one at a time, proceeding either
forward or backward.
1
Press the Playback button after taking a picture.
An image will be displayed on the LCD monitor.
2
Press the four-way controller (
45
).
displays the previous image.
displays the next image.
While the image is displayed, you can erase it by
pressing the
i
button (The Delete screen will be
displayed.), press the four-way controller (
2
) to
select [Delete], and then pressing the OK button.
Press the Playback button or press the shutter
release button halfway to return to shooting
status.
Playing Back Previous or Next Images
Erasing the image displayed on the LCD monitor
• The camera turns on in Playback Only mode when you turn the
camera on while pressing the Playback button. As the lens does not
extend in Playback Only mode, this feature is useful when you want
to pass the camera to someone and show them the picture you have
just taken. Turn the camera off and then turn it on again to switch to
the Capture mode.
• You can enlarge the image displayed on the LCD monitor by pressing
the Zoom / f / y button.
• When the screen is changed to the playback screen, the image with
the largest file number will be displayed first.
• In the case of movie pictures, the first frame will be displayed.
• If there are no images stored, the [No image & sound] message will
be displayed.
Zoom Display 1 p.89
Adding a Voice Memo 1 p.90
C a n c e l
D e l e t e
100-0020 100-0020 100-0020
MENU OK OK OK Exit Exit OK Exit All images & sounds All images & sounds All images & sounds
File No.