Pentax Optio 555 - Manual (Page 106)

104
5
Playb
ack
/
Erasin
g
Printing Directly from the Camera
Connected to a Printer
When you use the USB cable provided with the camera (I-USB7) to
connect the camera to a printer that supports PictBridge, you can print
images directly from camera without using a PC. The selection of the
images to print and the number of prints are set using the controls on
the camera after the camera has been connected to the printer. You
can use settings for printing services to print one image at a time.
1
Enter the Playback mode, then press the MENU / Fn
button.
The Playback menu appears.
2
Use the four-way controller (
23
) to
select [PictBridge].
3
Press the four-way controller (
5
).
The message “Connect camera & printer” is
displayed.
4
Connect the camera and printer
with supplied USB cable. The image is displayed for
printing.
• We recommend that you use the AC adaptor D-AC7 while the camera
is connected to a printer. The printer not operate correctly or image
data may be damaged when the power for the battery runs low while
the camera is connected to the printer.
• Depending on the type of printer, camera settings (such as image
quality and DPOF settings) may not be reflected.
Connecting the camera to the printer
C o n n e c t c a m e r a & p r i n t e r C o n n e c t c a m e r a & p r i n t e r C o n n e c t c a m e r a & p r i n t e r
Exit Exit Exit MENU