Audio dubbing, P52), 52 (e) – Panasonic AG-DVC60 E User Manual
Page 52: Ag-dvc60e_en.fm 52 ページ 2004年9月2日 木曜日 午後1時43分, Lcc lk lcc lk cam vcr, User1 button user2 button

52 (E)
Audio dubbing
Background music or narration can be added to the
images you have recorded on the tape.
1
Press the MODE button to set the camera-recorder
to the VCR mode.
2
Using the menus
(P62-64), select the audio record-
ing system at the AUDIO REC item on the
RECORDING SETUP screen.
(P69)
3
Select the sound to be recorded using the A DUB
INPUT item on the AV IN/OUT SETUP screen.
(P71)
4
Find the scene where the sound is to be added,
and set the camera-recorder to the still-picture play-
back mode.
5
Press the A.DUB button on the remote control unit
to establish the status ready for audio dubbing.
6
Press the PAUSE button (h) on the remote control
unit and start input of the sound to be dubbed.
7
When the PAUSE button (h) on the remote control
unit is pressed, the camera-recorder reurns to the
still-picture playback mode.
If more sound is to be dubbed, repeat steps
5
and
6
.
8
When the STOP button (g) on the remote control
unit is pressed, audio dubbing is stopped.
32K (12bit):
The sound is recorded using the 12-bit/32kHz (4-
channel) system.
Use this mode when you want to keep the sound
that was heard while you were shooting even after
audio dubbing has been performed.
48K (16bit):
The sound is recorded using the 16-bit/48kHz sys-
tem (2 channels with a good sound quality).
When audio dubbing is performed, the sound that
was heard while you were shooting will be erased.
MIC:
The sound of the built-in or external microphone is
recorded.
A_IN:
The sound of the audio component connected to
the AUDIO IN/OUT jack is recorded.
POWER
lcc
lk
lcc
lk
CAM
VCR
STILL ADV PAUSE STILL ADV
INDEX
Ð
STOP
INDEX
PLAY
/REW
FF/
CH2
OIS
ZEBRA
REAR
CH1 CH2
MIC
RESET
FOCUS
USER 2
SEARCH
MANUAL
MENU
VOL/JOG
SEARCH
D.ZOOM
USER 3
STILL
WHITE BAL
AUTO
PUSH
SHUTTER/IRIS
When the AUDIO DUB (sound adding) function is
allocated to a USER button on the camera-recorder,
audio dubbing can be performed (sound can be
added) by operating that button in the same way as
the PAUSE button (h) on the remote control unit.
• You cannot allocate functions to USER 3.
^Kar_
COUNTER RESET
TITLE
STILL ADV PAUSE STILL ADV
V
O
L
+
MULTI/
P-IN-P
REC
A.DUB
PLAY
/REW
FF/
B
ZOOM
-
^Kar_
STILL ADV PAUSE STILL ADV
INDEX
Ð
STOP
INDEX
PLAY
/REW
FF/
CH1
CH2
AUDIO LEVEL
REC
MODE CHK
SNS
OIS
ZEBRA
RESET
COUNTER
ZOOM SPEED
OFF/M
H
L
AUDIO IN
FRONT
REAR
CH1 CH2
MIC
MIC
LINE
RESET
FOCUS
USER 2
SEARCH
MANUAL
MENU
VOL/JOG
SEARCH
D.ZOOM
USER 3
STILL
WHITE BAL
AUTO
PUSH
SHUTTER/IRIS
USER1 button
USER2 button
AG-DVC60E_En.fm 52 ページ 2004年9月2日 木曜日 午後1時43分