Paradyne ACCULINK 3161 CSU - Manual (Page 7)

5
Table 1. DTE Interface Configuration Options
Option Factory 1 Factory 2 Comments/Description
DTE Port:
Enab Enab
Enables the use of the DTE
DTE Port:
Disab Disab
Enables the use of the DTE
Drop/Insert port.
DTE Framing:
D4 D4
Selects D4 or ESF framing format DTE Framing:
ESF ESF
Selects D4 or ESF framing format.
DTE Coding:
AMI AMI
Selects AMI or B8ZS line coding
DTE Coding:
B8ZS B8ZS
Selects AMI or B8ZS line coding
format.
0–133 0–133
Equal:
133–266 133–266
Equal:
(DTE Line
E li )
266–399 266–399
Provides selectable extended DTE
range capability.
(DTE Line
Equalizer)
399–533 399–533
range capability.
533–655 533–655
Extrn DLB:
(External DTE Enab Enab
Allows control of DLB on external
(External DTE
Loopback)
Disab Disab
Allows control of DLB on external
contact closure.
Send Ones:
Enab Enab Sends all ones on channels
allocated to the network T1 on
Send Ones:
Disab Disab
allocated to the network T1 on
LOS, LOF, or AIS.
Table 2. Port Configuration Options (1 of 3)
Option Factory 1 Factory 2 Comments/Description
E530 E530
Port Type:
V.35 V.35
Selects the port type: EIA-530A,
Port Type:
RS449 RS449
Selects the port type: EIA-530A,
V.35, RS449, or X.21.
X.21 X.21
Base Rate:
Nx64 Nx64
Enables the port to either Nx56 or
Base Rate:
Nx56 Nx56
Enables the port to either Nx56 or
Nx64 rates.
Disab Disab
Net DCLB:
V.54 V.54 Network-initiated DCLB, allows
DCLB t b
t ll d b i b d Net DCLB:
FT1 FT1
Network initiated DCLB, allows
DCLB to be controlled by inband
V.54 or FT1 (ANSI) codes.
Both Both
5 o ( S ) codes